Recycled bags need recycled tags

I've been wanting to have some garment tags made for my FatBottomBags, but after searching the internet for an option I found it is extremely expensive to have custom tags printed and it was impossible to find a recycled material option.  So after some struggle, I've found a way to make my own recycled tags to mark my bags as original FatBottomBags!

You might use this shrink plastic method to do a quick and fun recycled project with the kids *remember shrinkedinks*, or to create your own tags, beads, charms for a bracelet or necklace or even buttons for a sewing project!  

Here's what you'll need for this project:

• Cookie sheet lined with paper
• #6 plastic containers
• Sharpies or other permanent markers
• Scissors
• Hole punch
• Oven

Step 1:  Preheat your oven to 350 degrees

Step 2:  While oven is heating, begin to cut out shapes from your plastic container.  These will shrink significantly, so cut them about 3 - 4 times larger than you want your finished item sized. 

Step 3:  Using your regular hole punch, punch holes in the plastic.  For mine I put a hole on each end so I can sew the tags onto my FatBottomBags. 

Step 4:  Decorate with sharpies.  I just added the name FatBottomBags to mine. 

These large thin pieces will become smaller thick tags

Step 5:  Lay your decorated item on a lined cookie sheet.  I used regular paper to line mine.  Leave some space between each piece.

Step 6:  Once you've completed all of your designs and have your items on the cookie sheet, place in preheated oven for 2 to 3 minutes.  Be sure to run your vent fan to ventilate any fumes.  (I didn't notice any bad smell when doing this project)

Step 7:  Remove from oven.  Allow to cool on a flat surface.  Once your items are cooled they are ready.

Fast, fun and recycled!  I think these will look nice on my recycled FatBottomBags.  :0)